Learning Outcomes

Introduction to Sustainability

Buildings, Needs and 'Sustainability'

Sustainability and Sustainable Development

Historic Origins of Sustainability

Pioneers of Sustainable Development

Lesson Summary

This module introduces the concept of sustainability and sustainable development and traces the history of evolution of these concepts.

Impacts on Water

Impacts on Land and Air

Social and Economic Impacts of Development

Agenda 21 and UN Goals

Established Needs for Sustainability in Building Sector

This module examines the environmental impact of development, including the impact on  water, land, air and the socio-economic environment.

Definition and Characteristics of Sustainability

Flavours of Sustainable Architecture

Indicators and Terminologies in Sustainable Architecture

Process of Designing Green Buildings

Green Building Rating and Components

This module explains what is meant by sustainable architecture and the various terminology around it. It also explores the concept of green buildings and their certifying agencies around the world.

Fundamentals of Thermal Comfort

Climatic Considerations and Physiological Objectives of Design

Fundamentals of Climate Responsive Buildings

Analyzing Climatic Conditions

Visual and Acoustic Comfort

This module looks at the climatic considerations and comfort aspects of building design, including thermal, visual and acoustic comfort.

Site Selection

Site Development Strategies

Design Issues: Urban Heat Island

Stormwater Management

Large Site Development

In this module, you will learn about site selection and development for sustainable architecture. The module also covers the issues and concerns associated with site development, especially for large sites.

Water Conservation Planning

Rainwater Harvesting

Water Efficient Landscaping

Wastewater Treatment

Water Balance Chart

This module discusses how water can be saved, how it should be treated and what should be our aims when we are using water in the built environment, buildings or large scale development. This also includes different types of water treatment plants and the factors and calculations around selecting the correct water treatment system.

Advanced Diploma in Sustainable Architecture - First Assessment

This assessment enables you to review your learning so you can determine your knowledge and understanding of Modules 1 to 6 in the following course:
• Advanced Diploma in Sustainable Architecture

Solid Waste Management

Waste Management: Technology and Compliance

Material Reuse in Construction

Recycled and Locally Sourced Material

Renewable Materials

In this module, you will learn about the different properties to be considered while selecting the materials and resources for construction and maintenance of sustainable buildings. You will also learn about waste management and the various compliance criteria for selecting, using, and reusing different materials and disposing of waste.

Energy Efficiency - Learning Outcome

Energy Consumption Trends

Building Design Considerations

Energy Consuming Equipment

Energy Compliance

Lighting Compliance and Net Zero Buildings

In this module, you will learn about the specific requirements of energy efficient buildings, in terms of the design, materials, equipment and practices. You will also learn about the different compliance criteria for energy efficient buildings and the calculations involved. Finally, you will earn about Net Zero Energy buildings with the help of examples.

Indoor Air Pollution

Ventilation and Indoor Air Management

Indoor Emissions

Designing for Thermal and Visual Comfort

Criteria for Human well-being

In this module, you will learn about the design considerations for safe and healthy indoor air quality, including materials used, ventilation design,  and airflow provisions.

Vernacular Architecture

Vernacular Designs and Sustainability

Building Codes and Standards

Introduction to Whole Building Simulation

Base Case and Proposed Case

In this module, you will learn about the various types of Vernacular Architecture  with the help of examples. You will also learn about the different regulatory requirements and codes that need to be complied with and you will be introduced to the Whole Building Simulation  tool.

Whole Building Simulation: Base Case - Learning Outcome

File Creation

Activity Tab

The Outer Wall

Lighting and HVAC

Summary Generation and Results Analysis

In this module, the base model of a simple building is simulated to demonstrate how it is done using the Design Builder software. Here you will learn how to create the geometry of a proposed building using the Design Builder tool, which has an Energy Plus Simulation Engine.

Whole Building Performance - Learning Outcome

Proposed Case Modelling

Proposed Case Development

Energy Analysis

Daylight Calculation

Base Case from Proposed Case

In this module, you will see how the Proposed Case of a building is created from the Base Case, the required values are changed and simulated. You will also see a simpler way of creating the Base Case simulation to compare with the Proposed Case for submission to certifying bodies.

Advanced Diploma in Sustainable Architecture - Second Assessment

This assessment enables you to review your learning so you can determine your knowledge and understanding of Modules 6 to 12 in the following course:
• Advanced Diploma in Sustainable Architecture

Advanced Diploma in Sustainable Architecture - Course Assessment

In this training course, learn about the basic concepts, issues, and design considerations for sustainable architecture.

Advanced Diploma in Sustainable Architecture

This free advanced diploma in sustainable architecture explains what sustainable architecture means and how sustainable structures are designed and created. The course covers the various environmental and socio-economic aspects of sustainable architecture, including climate, air quality, waste management, and energy considerations. The course also introduces the tools and technologies that aid in the sustainable design of green buildings.

This free online course offers an advanced diploma in sustainable architecture, explains what sustainable architecture means and how sustainable structures are designed and created. The sustainable design course begins by discussing the concept of sustainable development and how it relates to sustainable architecture. The various aspects of sustainable architecture such as the socio-economic and environmental aspects are explored in detail.
The sustainable architecture course then examines the tools for understanding the response of a building to a given climatic context, the sustainable design strategies and construction strategies to be employed, including water and other materials and resources for sustainable architecture and management of solid waste. This is followed by a study of the various criteria set for energy efficiency in buildings and indoor air quality.
Finally, the discussion turns towards the available technologies and tools that aid in sustainable design and energy efficient buildings. The course covers in detail, how to create a building model using a design builder software, including how to input various parameters into the whole building simulation software and how to understand the output of the simulation for assessing the Whole Building Performance of the model.
This sustainable design course will help you to understand the basic issues and concerns for sustainable architecture and strategies and technologies to deliver them. Although largely addressed towards undergraduate students, all others who want to learn about sustainable and green building concepts and who are planning to go ahead in the field of green buildings design and implementation will greatly benefit from this course.

Open edX Conference 2024: Program & Speakers

2U Lays Off Staff for the Sixth Time Since its $800M edX Acquisition

30+ Holiday Discounts & Online Learning Deals

7 Best Technical Writing Courses to Master Documentation and Communication

The Business of Online Education: A Deep Dive Into Thinkific’s Financials

OpenAI Academy Review: A Close Look at ChatGPT 101 for Small Businesses

From Zero to Cybersecurity Analyst: How Google’s Certificate Can Launch Your Career

Udemy vs Coursera: Comparing Online Learning Giants that IPO’d in 2021

10 Best Programming Courses for 2025

Coursera Lays Off ~150 Staff After Udemy Merger

The Day MOOCs Truly Died: Coursera’s Preview Mode Kills Free Learning

9 Best Cinema 4D Courses for 2025: Navigating the 3D Universe

5 Best Free Raspberry Pi Courses for Beginners in 2025

Chasing 100M Daily Users, Duolingo Reconsiders Ads, Paying Influencers, and Its Most Expensive Plan

University of Sheffield Ends 11-Year Partnership with FutureLearn

Stanford Medicine Offers Courses with Free Certificate & CME Credit

Aims & Objectives of ISO/IEC 17025:2017

Accrediting to ISO/IEC 17025:2017

Main Sections of ISO/IEC 17025:2017

This module presents the fundamental aspects of ISO/IEC 17025:2017 along with its aims and objectives. The module also explains different forms of standardized verbs used throughout the standard. Moreover, you will also learn the benefits of accrediting to ISO/IEC 17025. Lastly, an overview of the section's standard is also given.

General and Structural Guidelines for Laboratories

Resource Requirements for Testing Laboratories

Contracts, Validation, Sampling & Handling

Technical Records, Uncertainty, Results Validity, & Reports

In this module, you will encounter the essential requirements given in clauses 4, 5, 6, and 7 of ISO/IEC 17025;2017. However, the explanation of Clause 7 is provided till sub-clause - 7.8. Through this module, you will learn about the general, structural, resource, and process requirements of ISO/IEC 17025:2017.

Information Management, Complaints & Nonconformities (NCs)

Management System Requirements

Taking Corrective Actions

In this module, you will see discussions on ISO/IEC 17025:2017 beginning from sub clause 7.9 that puts forward the complaint requirements put forth by the standard. Furthermore, it presents the standard's requirements regarding management systems. Moreover, it also contains necessary measures to be taken for corrective actions.

ISO/IEC 17025:2017 - Laboratory Management System- Course Assessment

Learn about laboratory management systems laid out by the ISO 17025 international standard in this free online course.

ISO/IEC 17025:2017 - Laboratory Management Systems

This short course is designed for individuals and laboratories looking forward to their standardisation. We explain management standards defined by the ‘ISO/IEC 17025 general requirements for testing and calibration laboratories competence’ devised by ISO. This comprehensive course explains all the basic and essential requirements of the standard. It also provides a simplified clause-by-clause explanation of its four main sections.

Fundamentals of Pest Control

Pest Identification and Assessment

Non-Chemical Pest Control Methods

Chemical Pest Control Methods

This module will teach you the fundamentals of pest control, types of pests and their impact, pest life cycles and behavior, factors influencing pest infestations, pest identification and assessment, non-chemical pest control methods, genetic control and sterile insect, chemical pest control methods, and integrated pest management (IPM) approach.

Monitoring and Prevention

Sustainable Pest Management

Urban and Structural Pest Control

Topics you will learn in this module include but are not limited to pest monitoring techniques, preventive measures and exclusion strategies, ecological impact of pesticides, selective pesticide use and resistance management, organic and biodynamic pest management, pest management in residential areas, and commercial and industrial pest control.

Pest Control and Management - Assessment

This free online course teaches you how to use chemical and non-chemical pest control techniques to manage infestations.

Pest Control and Management

Pests make environments unhygienic and are a major cause of diseases, some of which may be lethal and difficult or expensive to cure. Effective pest management and control are necessary to keep a living and working environment free from health hazards. This course provides the knowledge and skills required to establish and maintain a successful pest control management programme and describes various pests, their life cycles and their behaviour.

Foundations of Construction Safety Management

Safety Management for Hazardous Environments

High-risk Site Activities and Demolition Safety

This module covers risk identification and mitigation in construction work and how to evaluate and manage risk in compliance with CDM regulations. You'll also learn how behaviour affects safety on construction sites, including safety measures for scaffolding, excavation, demolition and more.

Course Assessment - Site Management Safety Training Scheme (SMSTS)

Learn how to manage safety on construction sites in accordance with UK legal provisions in this free online course.

Site Management Safety Training Scheme (SMSTS)

Construction workers are often vulnerable to injuries and hazards so ensuring safety is maintained consistently is crucial for both site managers and workers. This course covers the essential knowledge needed for maintaining safety on construction sites. You'll learn to identify and assess risks while adhering to UK industry regulations. In addition, we'll discuss safety measures to take during erecting scaffolding, excavations and demolitions.

Introduction to Hot Work

Classification of Hot Work Areas

Roles and Responsibilities

Hot Work Permit

Hot Work Risk Assessment

Essential Safety Precautions

This module will familiarize you with hot work processes, including their potential hazards and safety precautions. You'll learn how to assess the risks associated with hot work and determine appropriate control measures. You'll also understand the hot work permit system and the roles & responsibilities of those involved in the permitting process.

Hot Work Safety - Course Assessment

Learn how to manage the hazards associated with hot work processes in this free online health and safety course.

Hot Work Safety

This hot work safety training equips you with the essential knowledge to recognize and mitigate hot work hazards. You'll understand the hot work risk assessment process and hierarchy of controls for effectively reducing risks. The course explains the hot work permit system along with the roles and responsibilities of those involved in the permitting process. You'll also gain a clear understanding of hot work permitted and prohibited areas.

Introduction to Traffic Marshalling

Traffic Management

Temporary Traffic Control

Traffic Risk Assessment

Vehicle Signaling

Reversing Vehicles

Health and Safety

In this module, we will look at the fundamental objectives of traffic marshalling and the general duties of a traffic marshal. A traffic marshal's responsibilities when controlling traffic on a highway or construction areas shall be examined. Assessing risks along with health and safety concerns of traffic near construction areas will be assessed.

Construction Safety: Traffic Marshalling - Course assessment

Train as a traffic marshal or bankman who provides traffic management on construction sites in this free online course.

Construction Safety: Traffic Marshalling

This course takes an in-depth look at the role of traffic marshals on construction sites. Traffic management is important to maintaining health and safety as the presence of heavy machinery and large vehicles creates a need for the efficient direction of traffic. Traffic management in such a busy area faces hazards and safety risks, which we identify in this course. Sign up to train as a traffic marshal or bankman and add a skill to your CV.

Introduction to the AS Standards

Organization's Context and Leadership

QMS Planning and Support

This module introduces students to the AS standards for suppliers of the aviation industry. It explains the importance of regulations in the aerospace industry and navigates them through the journey of different AS standards. It also explains the requirements of Clauses 4, 5, 6, and 7 of this standard.

Organizational Operations

Operations and Evaluation

Organizational Improvement

This module explains the requirements of Clauses 8, 9, and 10 of AS9100D. These requirements are regarding organizational operations, evaluation, and continuous improvement of the organizational operations.

AS9100D Quality Management System (QMS) for Aerospace Industry - Course Assessment

Learn the requirements of AS9100D for the developers and suppliers of components for the aerospace & defense industries.

AS9100D Quality Management System (QMS) for Aerospace Industry

This course explains different clauses and their various requirements for the organizations that develop, design, or supply parts, components, and assemblies concerned with the aerospace and defense industries. After enrolling, the students will be able to navigate the differences between the different versions of the AS standards. Moreover, they will also get a simple and straightforward explanation of this standard's requirements.

Introduction to Hazardous Materials Handling - Learning Outcomes

Understanding Hazardous Materials

Legal and Regulatory Compliance

Importance of Hazard Communication

Risk Assessment and Management

Personal Protective Equipment (PPE) for Hazardous Materials Handling

Introduction to Hazardous Materials Handling - Lesson Summary

In this module, participants will have a solid foundation in understanding hazardous materials, legal and regulatory compliance, hazard communication, risk assessment, and the proper use of personal protective equipment. This knowledge is essential for creating a safe and compliant working environment in industries dealing with hazardous materials.

Hazardous Materials Storage and Transportation - Learning Outcomes

Proper Storage Practices for Hazardous Materials

Managing Segregation and Compatibility of Hazardous Materials

Emergency Preparedness for Hazardous Materials Storage

Transportation Regulations

Handling Hazardous Materials in Transit

Emergency Response Planning

Case Studies and Lessons Learned

Hazardous Materials Storage and Transportation - Lessons Summary

This module covers storing hazardous materials, segregation and compatibility, and developing emergency response plans. Learn DOT regulations, proper labelling, packaging, and security measures for transportation, best practices for loading/unloading and case studies.

Advanced Hazardous Materials Handling Techniques - Learning Outcomes

Decontamination Procedures

Confined Space Entry Protocols

Managing Hazardous Waste

Best Practices for Chemical Spill Response

Continuous Improvement in Hazardous Materials Handling

Advanced Hazardous Materials Handling Techniques - Lesson Summary

This module covers decontamination techniques to ensure health, safety, and regulatory compliance. Learn to manage decontamination zones, handle confined space hazards, and apply physical, chemical, thermal, and radiological decontamination. Develop skills in PPE selection, emergency response planning, and environmental protection.

Gain expertise, ensure safety, and excel in hazardous materials handling with this comprehensive free online course.

Hazardous Materials Safety Specialist

This course covers the classification, legal compliance, and risk assessment of hazardous materials. It delves into communication standards, PPE usage, and storage guidelines. Transportation regulations and emergency response planning are also covered. Advanced techniques include decontamination, confined space entry, hazardous waste management, chemical spill response, and continuous improvement through safety audits and case studies.